Step One: Align the 12 suction cups with the screw holes under the base.
Step Two: Fill the base with sand or water. It is recommended to fill it all
with sand or add sand to two-thirds of the base volume blended with
some water , then press the top cover.
Step Three: Place the sandbag on the base, align with the hole position,
tighten the screws, and the installation is complete.
ASSEMBLY
◆ Sandbag cover can be cleaned regularly with leather care solution.
◆ For long term non use, please collapse and wrap into plastic bag or
other dirt proof packing. Store in cool dry places, avoid overexposure to
sunlight causing discolor or aging.
◆ Regularly change punching spots, do not always hit the same area.
◆ Not applicable to watery or undulant surface.
◆ Wipe off dirt with wet cloth(no hotter than 104
O
F), then dry it.
MAINTENANCE
◆ When you need to move the stand, please insert something thin and
hard like playing cards into cups to dissipate suctions for easy rolling
away. Please do not pull up by force.
◆ Children should play under the supervision of adults.
CAUTION
INSTALLATION
DES INSTRUCTIONS
Sac de boxe x1pc
1
Zone de coup de pied x1pc
2
Connecteur de base x1pc
3
Base de sac de sable x1pc
4
Ventouse en caoutchouc x12pcs
5
Clé x1pc6
7
06 07
FR
Vis x12pcs
Φ8x16mm
To Next Page
Loading...