What to do if there is no display on my Gymstick GB8.0 Exercise Bike computer console?
If there is no display on the Gymstick Exercise Bike's computer console, first, remove the console and verify the wires are properly connected from the console to the handlebar post. Also, check if the batteries are correctly positioned and that the battery springs are making proper contact. If the display is still off, replace the batteries with new ones.
Why does my Gymstick GB8.0 make a squeaking noise when I use it?
If your Gymstick Exercise Bike is making a squeaking noise, the bolts may be loose. Inspect all bolts and tighten any that are loose.
What to do if there is no heart rate reading or heart rate reading or is erratic / inconsistent on Gymstick GB8.0 Exercise Bike?
If you're experiencing an erratic or absent heart rate reading on your Gymstick Exercise Bike, first ensure that the wire connections for the hand pulse sensors are secure. When testing your heart rate, hold the handlebar grip sensors with both hands. Avoid gripping the hand pulse sensors too tightly; maintain moderate pressure.
How to stop Gymstick GB8.0 from wobbling?
To stop a Gymstick Exercise Bike from wobbling, turn the adjustable leveler on the rear stabilizer as needed to level the bike.
General| Resistance | Magnetic |
|---|---|
| Resistance Levels | 32 |
| Heart Rate Monitoring | Hand pulse sensors |
| Drive System | Belt Drive |
| Transport Wheels | Yes |
| Type | Upright |
| Display | LCD |
| Programs | 12 |
| Display Metrics | Time, Speed, Distance, Calories, Pulse |
| Seat Adjustment | Vertical |
To Next Page
