EasyManuals Logo

GYS BATIUM Series User Manual

GYS BATIUM Series
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10
BATIUM 7/12 • 7/24 • 15/12 • 15/24
EN
Translation of the original instructions
Risk of explosion and re!
A battery being charged can emit explosive gas.
During the charge, the battery must be placed in a well
ventilated area.
Avoid ames and sparks. Do not smoke.
Protect the electrical contacts of the battery against short-
circuiting.
Acid projection hazard!
• Wear safety goggles and protective gloves.
If your eyes or skin come into contact with battery acid,
rinse the affected part of the body with plenty of water
and seek immediate medical assistance.
Connection / disconnection:
Disconnect the power supply before connecting/
disconnecting the device to/from the battery
The terminal of the battery that is not connected to the car
frame must be connected rst. The other connection must
be made on the car frame, far from the battery and the
fuel line. The battery charger must be connected to the
power supply network.
After the charging process, disconnect the battery charger
from the power supply network and remove the connector
from the car frame and then the connector from the battery,
in this order.
Connection:
This device must be connected to an earthed power supply.
• This machine is fuse-protected.
Connection to the mains must be made according to the
national installation regulations.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GYS BATIUM Series and is the answer not in the manual?

GYS BATIUM Series Specifications

General IconGeneral
Frequency50/60 Hz
Battery TypesLead-acid
Battery Voltage12V, 24V
FeaturesAutomatic charging
ProtectionShort circuit, reverse polarity
CertificationsCE

Related product manuals