What to do if my GYS Remote Starter can't start the vehicle?
If your GYS Remote Starter unit fails to start the vehicle, there might be several reasons: * Ensure the switch is in the ON position. * The internal battery may be discharged. Charge the unit fully and try again. * Avoid multiple jump start attempts without pauses. Wait 3 minutes between starts, and each start should not exceed 6 seconds. * Verify the vehicle's battery voltage is 12V.
Why are there sparks when connecting the GYS Remote Starter clamps to the battery?
If sparks appear when connecting the clamps of your GYS Remote Starter to the battery terminals, it could be due to: * The switch being in the ON position. Turn the machine off before connecting the clamps. * Incorrect polarity. Ensure the positive and negative clamps are correctly placed on the battery terminals.
Why does my GYS GYSPACK AIR Remote Starter keep beeping?
If your GYS Remote Starter device beeps, it indicates that the device detects a polarity reversal. To resolve this, check the battery polarity.
What to do if my GYS GYSPACK AIR Remote Starter won't start and no LEDs turn on?
If your GYS Remote Starter can no longer start the vehicle and none of the LEDs switch on in "Test" mode, it could be due to: * Very low internal battery voltage, potentially indicating damaged internal batteries. Try charging the device to recover the battery. * The internal battery may be damaged beyond repair. Contact GYS after-sales service to replace the battery.
Why doesn't the lamp on my GYS Remote Starter turn on?
If the lamp on your GYS Remote Starter does not switch on, it is likely because the internal battery is discharged. Charge the unit and try again once the charge is complete.
How to fix a GYS Remote Starter when it's not charging?
If the internal battery of your GYS Remote Starter isn't charging (no charging LEDs activate), ensure that the external charger plug is correctly connected to the machine's socket.
Why is my GYS GYSPACK AIR Remote Starter not delivering power in 12V mode?
If your GYS Remote Starter no longer delivers power in external 12V power source mode, it's possible that the internal thermal protection circuit-breaker has tripped. Disconnect the external device and allow the circuit-breaker to reset automatically.
General| Model | GYSPACK AIR |
|---|---|
| Category | Remote Starter |
| Input Voltage | 230 V |
| Integrated Air Compressor | Yes |
| Operating Voltage | 12 V |
| Compatibility | 12 V vehicles |
| Features | Integrated air compressor |
| Battery | 22 Ah |
| Battery Type | Lead-acid |
| Operating Temperature | -20°C to 60°C |
To Next Page
