GYS Gyspot Pro 400 User Manual

16/09/2016
MADE in FRANCE
- EN 60974-1
I2 max
U2
IRMS
50/60hz
A
V
A
A
cm kg
230V 1~ 2600 Manuel 5,4 16 1800 OK 20x32x18 14
GYSPOT 2700
STEEL DENT
PULLING
EQUIPMENT
Ref. 055353
The GYSPOT 2700, with its 2600A maximum output is the ideal product for dent pulling and
straightening of low thickness car body elements (bonnet, door, roof panel etc.) The product is
multifunctional, and eective for many applications. With its low power consumption, it can work on
a simple 230V power supply.
4 modes available :
• Welding of stars and washers for panel pulling.
• Wavy wire welding, ideal for a curved prole (e.g.
wheelarch)
• Contact shrinking, to work on light impacts and for
the highest quality nish.
• Able to use a graphite pencil.
• Switch to go to graphite pencil mode.
• Intuitive, the control knob enables selection of both
the output power and the requested mode.
• Manual, the weld is controlled by simply a light press
of the gun trigger.
A MULTIFUNCTIONAL DENT PULLER
EASY TO USE
Cables length
Power supply: 2 m
Earth: 1.7 m
Gun: 1.8 m
DELIVERED AS A STANDARD WITH:
• 1 spot inertia hammer (1,1kg)
and 1 star holder tip.
• 3 stars
• 1 contact shrinking tip
• 1 earth pad
OPTION:
Trolley
Spot 600
Ref: 053533
Trolley
Spot 800
Ref: 051331
Spotter Box 2700
Ref: 053922
www.gys.fr
I2 max
U2
IRMS
50/60hz
A
V
A
A
cm kg
230V 1~ 2600 Manual 5,4 16 1800 OK 20x32x18 14

GYS Gyspot Pro 400 Specifications

General

Brand	GYS
Model	Gyspot Pro 400
Category	Welding System
Language	English

Summary

Safety and Environmental Guidelines

General Usage Instructions

Read safety instructions before use. Avoid unauthorized modifications. Manufacturer not liable for misuse.

Operating Environment and Fumes

Use equipment in a specified environment. Ensure ventilation for hazardous fumes and dust.

Personal Protection Measures

Wear appropriate clothing, gloves, and eye protection. Be aware of hazards like heat, arc rays, and electrical shock.

Risk Management and Technical Safety

Fire, Electrical, and EMC Safety

Covers fire prevention, electrical safety measures, and electromagnetic compatibility classifications.

EMF Mitigation and Area Installation

Minimize EMF exposure and evaluate welding area for compatibility and potential issues.

Installation Responsibility

User is responsible for correct installation and resolving detected electromagnetic disturbances.