GYS GYSPOT 2700 User Manual

16/09/2016
MADE in FRANCE
- EN 60974-1
I2 max
U2
IRMS
50/60hz
A
V
A
A
cm kg
230V 1~ 2600 Manuel 5,4 16 1800 OK 20x32x18 14
GYSPOT 2700
STEEL DENT
PULLING
EQUIPMENT
Ref. 055353
The GYSPOT 2700, with its 2600A maximum output is the ideal product for dent pulling and
straightening of low thickness car body elements (bonnet, door, roof panel etc.) The product is
multifunctional, and eective for many applications. With its low power consumption, it can work on
a simple 230V power supply.
4 modes available :
• Welding of stars and washers for panel pulling.
• Wavy wire welding, ideal for a curved prole (e.g.
wheelarch)
• Contact shrinking, to work on light impacts and for
the highest quality nish.
• Able to use a graphite pencil.
• Switch to go to graphite pencil mode.
• Intuitive, the control knob enables selection of both
the output power and the requested mode.
• Manual, the weld is controlled by simply a light press
of the gun trigger.
A MULTIFUNCTIONAL DENT PULLER
EASY TO USE
Cables length
Power supply: 2 m
Earth: 1.7 m
Gun: 1.8 m
DELIVERED AS A STANDARD WITH:
• 1 spot inertia hammer (1,1kg)
and 1 star holder tip.
• 3 stars
• 1 contact shrinking tip
• 1 earth pad
OPTION:
Trolley
Spot 600
Ref: 053533
Trolley
Spot 800
Ref: 051331
Spotter Box 2700
Ref: 053922
www.gys.fr
I2 max
U2
IRMS
50/60hz
A
V
A
A
cm kg
230V 1~ 2600 Manual 5,4 16 1800 OK 20x32x18 14

GYS GYSPOT 2700 Specifications

General

Input Voltage	230 V
Output Current	2600 A
Frequency	50/60 Hz
Insulation Class	H
Cooling System	Air cooled

Summary

Multifunctional Dent Puller Features

User-Friendly Operation

Describes the intuitive controls and simple usage of the machine.

Multifunctional Dent Puller Capabilities

Easy-to-Use Controls

Highlights the simple interface and operation for user convenience.

User-Friendly Design and Features

Automatic Triggering

Ready-to-Use Components

Simplified Operation Modes

Manual Triggering Mode

General Safety and Operational Guidelines

Personal Protection

Details necessary safety gear and precautions to protect individuals from welding hazards.

Welding Fumes and Gas Safety

Emphasizes the importance of ventilation and fume extraction during welding operations.

Electrical Safety and EMC Compliance

Fire and Explosion Risk Prevention

Details measures to mitigate fire and explosion hazards in the work environment.

Maintenance and Product Overview

Technical Specifications and Operation

Electricity Supply Requirements

Operating Procedures and Warranty

Start-up and Operation

Guides users through the initial start-up sequence and step-by-step operation.