What to do if GYS Controller doesn't respond when pressing the switch button?
If your GYS Controller doesn't respond when you press the switch button, it might be due to the low voltage protection of the NOMAD POWER being activated. To resolve this, plug the adapter into the Quick Charge input port.
What to do if my GYS Extender doesn't respond when pressing the switch button?
If your GYS Extender does not respond when you press the switch button, it might be due to the low voltage protection of the NOMAD POWER being activated. To resolve this, plug the adapter into the Quick Charge input port to activate it.
Details hazards associated with battery charging, including explosive gas emissions and sparks.
Warns about battery acid hazards and necessary protective measures like goggles and gloves.
Explains device classifications for charger booster (Class II) and booster (Class III) modes.
How to check the remaining power level using the device indicators.
Step-by-step instructions for charging the device using a home adapter.
Guide on using the device to jump-start a 12V vehicle, including indicator light meanings.
To Next Page
General
