GYS Tool it DBT 300 User Manual

Translation of the original instructions
DISPLAY SCREEN CASE
Examples Analysis
The display shows HI The battery voltage is too high for the tester.
The display shows Lo
The battery voltage is too low for the tester. Recharge
the battery and repeat the test.
The screen is blank
The battery voltage is too low for the tester. Recharge
the battery and repeat the test. If the display remains
the same, replace the battery.
The display ashes or
displays RIPPLE
The voltage is not stable. Charge the battery, then
retest it. If the display remains the same, replace the
battery.
WARRANTY
The warranty covers faulty workmanship for 2 years from the date of purchase
(parts and labour).
The warranty does not cover:
• Transit damage.
• Normal wear of parts (eg. : cables, clamps, etc..).
• Damages due to misuse (power supply error, dropping of equipment, disas-
sembling).
• Environment related failures (pollution, rust, dust).
In case of failure, return the unit to your distributor together with:
- The proof of purchase (receipt etc ...)
- A description of the fault reported
9
DBT 300
EN

GYS Tool it DBT 300 Specifications

General

Brand	GYS
Model	Tool it DBT 300
Category	Test Equipment
Language	English