To Next Page
S
Sergio WalterAug 16, 2025
Why is the dispensed product from my H.C Duke & Son Arby's Electro Freeze CS704 Freezer too soft?
- TTara ReedAug 16, 2025
If the product dispensed from your H.C Duke & Son freezer is too soft, the following reasons might be the cause: * **Dirty or blocked condenser**: The condenser might be dirty or blocked, restricting airflow. Unblock the condenser or have it cleaned by your Electro Freeze Distributor. * **Torque control**: The torque control might not be set firm enough. Contact your Electro Freeze Distributor for service. * **Component failure**: Contact your Electro Freeze Distributor for service. * **Refrigeration leak**: There might be a leak in the refrigeration system, resulting in little or no refrigeration. Contact your Electro Freeze Distributor for service.
General
