EasyManua.ls Logo

H-KING BIXLER V2 User Manual

H-KING BIXLER V2
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Instruction Manual
Question and Answer IconNeed help?

Do you have a question about the H-KING BIXLER V2 and is the answer not in the manual?

H-KING BIXLER V2 Specifications

General IconGeneral
Wingspan1500mm
Length925mm
MaterialEPO Foam
Battery3S 11.1V 1300mAh LiPo
Control System4 Channel
ESC20A Brushless
Radio4 Channel (not included)
Battery Capacity1300mAh
Recommended Motor1400KV Brushless Outrunner
Servo9g Servo x 4

Summary

Specifications

Safety Precautions

Battery Charging and Safety

Battery Charging Procedure

Details the steps for charging the Li-Po battery using the provided charger.

Important Battery Charging Safety

Crucial safety warnings to follow during battery charging.

Assembly Instructions

Install Aileron Linkage

Connect the servo to the wing using the control rod.

Attach Main Wing Panel

Secure the main wing panel to the fuselage using the wing rod.

Install Vertical Tail

Fix the vertical tail and install its linkage rod.

Install Horizontal Stabilizer

Attach the horizontal stabilizer and its linkage rod.

Install Cockpit Canopy

Attach the cockpit and glue the plastic cover.

Attach Propeller

Securely attach the propeller using a screwdriver.

Verify Center of Gravity (CG)

Ensure the aircraft's center of gravity is set correctly as per diagram.

Operating the BIXLER

Powering Up Procedure

Steps for correctly powering on the transmitter and aircraft.

Final Adjustments and Checks

Performing final trim adjustments and checks before flight.

Essential Flight Warnings

Critical safety warnings and advice for operating the model.

Control Direction Test

Troubleshooting Common Issues

Related product manuals