6.
If you do not know what kind of fabric the article is made of, iron a piece of the material
which is not visible when you wear to find out the appropriate temperature for your
articles.
7.
Pure woollen fabrics (100% wool} should be ironed with the iron setting to steam ironing
position. lt is advisable to set the selection control button to "Cotton" position and use a
dry pressing cloth.
8.
When steam ironing woollen fabrics, shiny patches may occur. You may prevent this
by turning the article inside out and ironing the reverse side.
9.
After using of steam ironing for cotton fabrics, do not iron articles required by lower
temperature (such as nylon etc.) immediately.lt is advisable to adjust the selection
button to the lower setting, waiting for about 2-4 minutes till the blue indicator
light turn off, and then you can start ironing.
IMPORTANT HINTS:
Do not fillwater tank with vinegar, perfume, starch, chemically descaled water
or descaling
agents.
To Next Page
Loading...
