Why does my H2X Hot Tub have a chlorine odor?
If you notice a chlorine odor in your H2X Hot Tub, it's likely due to excessive chlorine or a low pH level. To resolve this, shock the water with an oxidizer/non-chlorine shock treatment. Additionally, check and adjust the pH level as needed.
How to fix cloudy water in H2X Hot Tub?
Cloudy water in your H2X Hot Tub can be caused by dirty filters, inadequate filtration, unbalanced water chemistry, or old water. Clean the filters with a filter cleaner and adjust the filtration settings. Test and adjust the water chemistry levels. If the water is old, drain the tub, clean the inner shell, and refill it with filtered water.
What to do if H2X Hot Tub causes eye or skin irritation?
Eye or skin irritation in your H2X Hot Tub can be caused by unsanitary water, a total chlorine level above 5 ppm, or poor sanitizer/pH levels. Adjust the water chemistry according to testing results. If the total chlorine level is high, apply an oxidizer/non-chlorine shock treatment. Adjust the pH level as necessary.
How to fix cloudy and green water in H2X THERAPOOL D Hot Tub?
If your H2X Hot Tub has cloudy and green water, it's likely due to low total alkalinity or low sanitizer levels. Use a pH increaser to raise the total alkalinity. Apply oxidizer/non-chlorine shock treatment and adjust the sanitizer levels.
How to remove scum deposits at waterline in H2X THERAPOOL D?
Scum deposits at the waterline in your H2X Hot Tub are typically caused by body oils and dirt. Use a multi-purpose cleaner to clean the spa surface and add an enzyme product to the spa water.
How to remove chalky white scale deposits from H2X THERAPOOL D?
Chalky, white scale deposits in your H2X Hot Tub are caused by minerals present in the water and a lack of sequestering agent use. When the tub is drained, use a multi-purpose cleaner or white vinegar and scrub with a soft cloth to remove the deposits.
Details on wire conductor requirements and safe electrical connections.
Details various types of entrapment hazards including hair, limb, and body suction.
General| Pumps | 2 |
|---|---|
| Max Temperature | 104°F (40°C) |
| Pump Power | 5.0 HP (2.5 HP x 2) |
| Lighting | LED multi-color lighting |
| Material | Acrylic |
To Next Page