H3C WX Getting Started Guide

14
Field
Description
domain system
access-limit disable
state active
idle-cut disable
self-service-url disable
Basic configurations in the default domain
system:
The number of associated clients is not limited.
Specify the current domain to be in the active
state.
Disable the idle-cut function for the current ISP
domain.
Disable the location function of the
self-service server.
user-group system
system is the default user group. You cannot
delete the default user group but you can
modify its configuration.
local-user admin
password simple admin
authorization-attribute level 3
service-type telnet
The default configuration of the local user is as
follows:
The username is admin.
The password is admin, case sensitive.
The user level is 3 (manage level).
The service type is telnet.
wlan rrm
dot11a mandatory-rate 6 12 24
dot11a supported-rate 9 18 36 48 54
dot11b mandatory-rate 1 2
dot11b supported-rate 5.5 11
dot11g mandatory-rate 1 2 5.5 11
dot11g supported-rate 6 9 12 18 24 36 48
54
The default 802.11a/b/g settings are as shown
on the left column.
The default rates depend on your AC model.
interface NULL0
The interface type supported by the AC.
interface Vlan-interface1
ip address 192.168.0.100 255.255.255.0
By default, the default IP address of
VLAN-interface 1 is 192.168.0.100, and the
subnet mask is 255.255.255.0.

H3C WX Specifications

General

Brand	H3C
Model	WX
Category	Controller
Language	English