H3C WX1804H Configuration Guide

5
Figure 2 Network diagram
Procedure
1. Configure IP addresses for interfaces as shown in Figure 2, and configure a routing protocol to
make sure the devices can reach each other. (Details not shown.)
2. Log in to the H3C Oasis server to add the serial number of the AC to the server. (Details not
shown.)
3. Configure the domain name of the H3C Oasis server as oasis.h3c.com.
<AC> system-view
[AC] cloud-management server domain oasis.h3c.com
NOTE:
The DNS service is provided by the ISP DNS server.
Verifying the configuration
# Verify that the AC and the H3C Oasis server have established a cloud connection.
[AC] display cloud-management state
Cloud connection state : Established
Device state : Request_success
Cloud server address : 139.217.27.153
Cloud server domain name : oasis.h3c.com
Cloud connection mode : Https
Cloud server port : 19443
Connected at : Wed Jan 27 14:18:40 2018
Duration : 00d 00h 02m 01s
Process state : Message received
Failure reason : N/A
Last down reason : socket connection error (Details:N/A)
Last down at : Wed Jan 27 13:18:40 2018
Last report failure reason : N/A
Last report failure at : N/A
Dropped packets after reaching buffer limit : 0
Total dropped packets : 1
Last report incomplete reason : N/A
Last report incomplete at : N/A
Buffer full count : 0
IP network
Cloud connection
AC
H
3
C Oasis server
Switch
Gateway
GE1/0/1
1
0
.0
.0
.
1/
24
139
.
217.
27.
1
53/
24
PC

H3C WX1804H Specifications

General

Brand	H3C
Model	WX1804H
Category	IP Access Controllers
Language	English