Why is there water left on the floor after using my Haan SELECT SI-60 Steam Cleaner?
If you notice water left on the floor after using your Haan Steam Cleaner, try changing the Ultra-microfiber pad. Also, ensure the unit is always level and parallel to the floor during operation.
How to remove white spots left by Haan SELECT SI-60 Steam Cleaner on the floor?
If your Haan Steam Cleaner leaves white spots on the floor, avoid leaving the unit in one spot for too long during cleaning. When the unit is ON and stationary, use a protector pad or floor mat. Consider using distilled water instead of hard tap water. To remove existing spots, rub them with a damp cloth and a few drops of white vinegar.
What to do if vibration sound lasts longer than 60 seconds on Haan SELECT SI-60?
If the vibration sound on your Haan Steam Cleaner lasts longer than 60 seconds, add water to the water tank and ensure that the water tank is inserted correctly in the unit.
What to do if my Haan SELECT SI-60 is not turning on?
If your Haan Steam Cleaner isn't turning on, first, make sure the plug is firmly set in the outlet. If it still doesn't work, try replacing the fuse or resetting the breaker.
Why is my Haan SELECT SI-60 not producing steam?
If your Haan Steam Cleaner isn't emitting steam, the most common reason is an empty water tank. Ensure the water tank is filled with water before use.
What to do if my Haan SELECT SI-60 leaves water on the floor?
If your Haan Steam Cleaner is leaving water on the floor, try these solutions: * Change the Ultra-microfiber pad. * Make sure the unit is always level and parallel to the floor during operation.
How to remove white spots left by Haan SELECT SI-60?
If your Haan Steam Cleaner leaves white spots on the floor, consider the following: * Avoid leaving the unit in one spot for too long when cleaning. * Use a protector pad or floor mat when the unit is ON but stationary. * Use distilled water instead of hard tap water. To remove existing spots, rub the stain with a damp cloth and a few drops of white vinegar.
General| Type | Steam Mop |
|---|---|
| Model | SI-60 |
| Water Tank Capacity | 350 ml |
| Heat-Up Time | 20 seconds |
| Steam Time | 20 minutes |
| Power | 1200 W |
| Steam Temperature | 120°C |
| Accessories | 2 x Ultra-Microfiber Pads |
Essential safety measures for operating electrical appliances, including user conduct and avoiding hazards.
Guidelines for safe electrical plug usage, polarization, and avoiding modification risks.
Diagrams and labels identifying all parts of the floor sanitizer for assembly.
Detailed instructions on assembling, filling, heating, and using the floor sanitizer.
Common problems encountered with the unit and their corresponding solutions.
To Next Page