Habegger HIT-TRAC 16B User Manual

User Guide
TGT. 27.09.2017 Technical Page 19 of 20
©Copyright by Habegger Maschinenfabrik AG Version 02 / 27.09.2017
7 Maintenance
The following checks and maintenance work should be carried out:
Task
At the start of
operation
As required
Comments
General visual checks:
- driving system
- housing
- Anchor bolts, anchoring straps
X
Screw check
X
after first use or
Overhauls
Clean driving wheel
X
Petrol motor: Refuel
X
X
see STIHL operating instructions
Sprocket re-lubrication
X
Gear grease
Rope: Visual checks
- compression sleeve
- eye hooks with fastenings
X
Checking for deformities,
Damage, tears
or broken wires
Rope: Cleaning
X
Rope: Diameter check
X
for worn out ropes,
when rope diameter < 10 mm
Change the rope!
Oil level in sight gauge
X
The machine, the rope and the accessories must be checked at least every 2 years (see sticker
on machine) by a qualified professional. In this way all parts will be checked for deformities,
wear and tear, and cracks. The results of these checks should be entered into the test book.
The checks should be arranged by the operator.
Additionally, local regulations, as well as additional checks for severe operating conditions in
short operating distances, must be implemented by a qualified professional.
8 Replacement parts
Replacement parts are provided on a separate list. This can be requested from HABEGGER.

Habegger HIT-TRAC 16B Specifications

General

Brand	Habegger
Model	HIT-TRAC 16B
Category	Chain Hoists
Language	English