If you live in an area with hard water, which means that the water contains too much calcium
and magnesium, it can cause “white powder” and scales on the water basin, transducer and
inner surfaces of the water tank. Scales on the surface of transducer will unable the unit work to
properly. We recommend:
1. Use cold boiled water or distilled water.
2. Clean the transducer, water tank and basin unit every week.
3. Change the water in water tank more often to keep it fresh.
4. Change the water in regularly and clean and dry the water tank before storing the machine.
5. If you plan not to use the unit for a longer period of time, clean the whole unit and make sure
that all parts of the unit are dried completely before storing.
Maintenance
5
How to clean the lter system:
1. Clean the ceramic balls after being used for 1000L of water.
2. Remove the lter system from the tank cover.
3. Put the lter system in the white vinegar for about 10 minutes.
4. After 10 minutes; shake the lter system several times then clean it with clear water.
5. Alternatively, take out the ceramic balls from the lter system and wash them with clean
water then let them dry in direct sunlight for several hours before putting them back in the lter
cartridge.
5. Let the lter system dry and pack it into a polybag. Keep it in a cool and shady place.
How to clean the transducer:
1. Put 5-10 drops of cleaning liquid on the surface of the transducer, wait for 2-5 minutes;
2. Brush away the scale on the surface.
3. Rinse the transducer with clean water.
How to clean the basin unit:
1. Clean the water basin with a soft cloth and use cleaning liquid if there is scale in it.
2. Rinse the water basin with clean water.
1. The lter is mixed with NANO-SILVER material to prevent bacteria.
2. The ceramic balls soften the hard water.
3. The ceramic lter eliminates odor from the water.
The water lter
To Next Page
Loading...