English 14
Save, recall, send and delete data
The data log
The data log can store up to 5000 readings saved by the following
programs:
• Stored Programs,
• Barcode Programs,
• User programs,
• Favorites,
• Single Wavelength and
• Multi Wavelength.
A complete record of the analysis is stored, including the Date, Time,
Results, Sample ID and Operator ID.
Recall stored data from the data log
1. Press Recall Data in the Main Menu.
2. Press Data Log.
A listing of the stored data is displayed.
Recall
measurement
data
Stored data can be called up, filtered, sent and deleted.
Instrument
Setup
In this mode, user-specific or method-specific settings can
be entered: operator ID, sample ID, date & time, sound, PC
& printer, password, energy-saving mode and stored data.
Table 2 Main Menu options
Option Function
To Next Page
Loading...
