What to do if absorbance is greater than 3.5 on Hach Measuring Instruments?
If your Hach Measuring Instruments displays 'Absorbance > 3.5!', it means the measured absorbance exceeds 3.5. To resolve this, dilute the sample and repeat the measurement.
General| Wavelength Resolution | 1 nm |
|---|---|
| Spectral Bandwidth | 5 nm |
| Light Source | Tungsten lamp |
| Detector | Silicon Photodiode |
| Power Requirements | 100-240 V AC, 50/60 Hz |
| Type | Spectrophotometer |
| Wavelength Accuracy | ±1 nm |
| Photometric Accuracy | ± 0.005 Abs |
| Display Features | Backlit |
| Operating Mode | Transmittance, Absorbance, Concentration |
| Power Supply | AC adapter |
| User Programs | 50 user programs |
| Data Storage | 500 data sets |
| Interface | USB |
| Operating Temperature | 10 to 40 °C |
To Next Page
