Hach DR 2800 - Setting Security Options (Password Protection)

27
Standard Operations
5.2.6.2 Printing Data
1. From the Main Menu, press RECALL DATA.
2. Select the data source, where the data to be printed are stored.
3. Select the data record that is to be printed from this list.
4. Press the
PRINTER icon to send the data (table, graph)
immediately to the printer.
5. Activate Single point, Filtered data, or All data and press
OK.
“Sending Data” is displayed until the data have been printed.
5.2.7 Setting Security Options (Password Protection)
The Password menu contains a variety of security settings to
control access to various functions.
1. From Instrument Setup, press
PASSWORD.
2. Select
SET PASSWORD to activate the Security List.
3. Use the alphanumeric keypad to enter a new Password
(up to 10 characters) and press
OK. Access to the Security List
is activated.
4. Press
SECURITY LIST to lock various functions for
unauthorized users.
5. Activate the desired functions to control. Press
OK to confirm
the Security List. The Password menu will be displayed.
6. Press
ON to activate the new settings of the Security List.
7. Enter the new Password again to confirm.
8. Press
OK to return to Instrument Setup.
Note: The alphanumeric keypad to the Password inquiry appears when a
user tries to reach a locked setting.