30
Standard Operations
5.3.1.4 Deleting Stored Data from the Data Log
1. From the Main Menu, press RECALL DATA.
2. Press
DATA LOG>OPTIONS and then DELETE.
3. Activate Single Point or Filtered data or All data and press
OK.
Note: The number in parenthesis is the total number of data sets assigned
to this selection.
5.3.2 Time Course
The instrument can store 20 Time Course Data sets. The data can
be stored manually at the user's discretion after viewing the data.
5.3.2.1 Data Storage from Time Course
1. After a reading is taken in Time Course mode, press OPTIONS>
STORE
. The Store Data List will display.
2. Press
STORE to save the current scan to the highlighted
numbered line. A scan can also be overwritten.
To Next Page
Loading...
