Hach DR 2800 - Section 6 Advanced Operations; 6.1 User Programs

47
Section 6 Advanced Operations
6.1 User Programs
User programs provide the opportunity of performing "made to
measure" analyses.
The User Programs database is empty when the instrument leaves
the factory and is used to accommodate programs created by users
for specific needs. Here are a few examples of entries:
• Programming of user-created procedures. The analysis
procedure must be developed first, before it can be
programmed. The user must define or determine the program
sequences, calculation formulas, measurement wavelengths,
factors, measuring range limits, etc.
• Modified tests.
• Assignment of user programs to the favorites menu for
frequently used tests.
• Creation of a specific selection of methods and tests
1. From the Main Menu, press
USER PROGRAMS and then
PROGRAM OPTIONS.
The Program Options menu contains several input and editing
options (Table 6).
Table 6 Program Options
Option Description
New
Select
NEW to program a new user program. The first time PROGRAM OPTIONS is selected, only the NEW
option is available. The other options remain inactive (gray) until the first program has been created.
Add to Favorites Select
ADD TO FAVORITES to add an existing user program to the list of frequently used programs.
Edit Select
EDIT to modify an existing user program.
Delete
Select
DELETE to remove a program from the list of user programs. The program will be simultaneously
deleted from the Favorites list.