13
Installation
3.6.2 Installing Cell Adapters
1. Open the cell compartment.
2. Select the correct adapter for the cell type.
3. Insert the adapter so the arrow on top of the adapter points to
the left and the orientation tab fits the groove in the
compartment opening. The cell type imprint should be legible
on the adapter (Figure 5).
Note: The arrow on top of the adapter indicates the direction of the
light beam path.
Figure 4 Cell Adapters
1 Adapter A (Cat. No. LZV583): 10 mm square cell adapter
2 Adapter B (Cat. No. LZV585): 1 inch Pour-Thru and multi-path adapter
3 Adapter C (Cat. No. LZV584): 1 inch round cell adapter
To Next Page
Loading...
