Hach sc200 4-20 User Manual

Installation
W A R N I N G
Potential Electrocution Hazard. Always disconnect power to the
instrument when making electrical connections.
W A R N I N G
Potential Electrocution Hazard. Only qualified personnel should conduct
the tasks described in this section of the manual.
N O T I C E
Potential Instrument Damage. Delicate internal electronic components
can be damaged by static electricity, resulting in degraded performance
or eventual failure.
Refer to the numbered steps for information on how to install the 4-20 mA
input module.
4 English

Hach sc200 4-20 Specifications

General

Operating Temperature	-20 to 60 °C (-4 to 140 °F)
Power Requirements (Voltage)	100-240 VAC, 50/60 Hz
Power Requirements (Power Consumption)	20 VA max.
Power Supply	100 to 240 VAC, 50/60 Hz
Operating Humidity	5 to 95% RH, non-condensing
Outputs	4-20 mA
Relay Contact Rating	5 A at 250 VAC, 5 A at 30 VDC
Digital Communication	Modbus RTU, HART
Enclosure Rating	NEMA 4X/IP66
Display	LCD
Dimensions	144 x 144 mm
Relay Output	Two SPDT (single pole double throw) relays