Need help?Do you have a question about the Hacona E-420 and is the answer not in the manual?
General welcome and overview of the HACONA system's quality.
Details the machine's use as bag maker and plain sealer.
Lists compatible films and maximum thickness for sealing.
Explains how to identify the machine by type and serial number.
Lists power supply, circuit breaker, sealing power, and nominal current.
Table showing maximum film width for different machine types.
Diagram and list of machine components and their locations.
Details the built-in hand pinch protection mechanism.
Describes the keypad layout and display functions for operation.
Table of weights and dimensions for packed machines.
Table of weights and dimensions for machines without the stand.
Table of weights and dimensions for machines with the stand.
Instructions for handling and placing the machine safely.
Specifies required temperature and humidity for operation.
Details grounding requirements and mains voltage checks.
How to use the machine when a stand is not available.
Instructions for assembling the machine stand and accessories.
Steps for attaching the machine to its support stand.
Provides a link to check the list of available accessories.
How to power on the machine and interpret KPAD display codes.
How to set the sealing time using the KPAD and relevant parameters.
How to set cooling time via KPAD and its dependence on settings.
Setting sealing temperature for machines with temp. sensor.
Setting cooling temperature for machines with temp. sensor.
Explains machine cycle time as sum of sealing, cooling, and bar times.
Describes the function button for ED, EB, and EBD machine types.
Methods to initiate the sealing process (foot pedal, sealing bar).
Guidance on performing initial test seals and setting parameters.
How to use the integrated cutting knife for excess foil.
Instructions for correctly placing the film reel on the stand.
Adjusting the working table tilt and bag support position.
How to lock machine settings with a user-defined password.
Procedure to unlock machine settings using the password.
How to unlock settings if password is forgotten using master code.
How to read the absolute counter for sealing cycles.
Instructions for packing the machine back into its original box.
Lists prohibited items to prevent damage or injury.
Describes the overheating protection feature and indicators.
Critical warnings regarding hot sealing wires and broken wires.
Essential safety steps before performing maintenance.
Instructions for cleaning the machine safely.
List of tools needed for maintenance and part changes.
Procedure for replacing the PTFE cover and sealing wire.
Detailed steps for replacing the machine's cutting blade.
Procedure for replacing the complete cutting knife assembly.
Instructions for safely replacing the main fuse in the machine.
Safety precautions and steps for disassembling machine components.
Information on filling out and returning the guarantee certificate.
Details the terms and conditions of the machine's warranty.
General| Model | E-420 |
|---|---|
| Category | Food Saver |
| Voltage | 230 V |
| Frequency | 50/60 Hz |
| Bag Width | up to 420 mm |
To Next Page
