A = Oil fill in or drain plug
14.5 Trolley
Trolleys are lifetime lubricated, Refill lubricant is normally not necessary.
Lubricate gear rim and pinion drive each ¼ year or if required more often, with grease.
14.6 Electric motor
For the motor it is sufficient to keep the cooling airways clean and monitor the roller bearing and its
lubrication status.
A high temperature fat must be used if the roller bearing is replaced.
Brake linings and surfaces must always be clean and fat-free. Even very small amounts of dirt can reduce
the braking moment considerably.
14.7 Lubricant selection
14.8 Lubricant for food industry – selection (as option*)
Load hook
Pulley
Spur gear
Pinion
* must be mentioned by order
125kg/1 = 1,1 l
250kg/1 = 1,1 l
500kg/1 = 1,1 l
1000kg/2 = 1,1 l
1000kg/1 = 1,6 l
2000kg/2 = 1,6 l
Exchange
lubricant
all 3 years
Pulleys
Gear rim
Drive pinion
Travelling gear
If available