7
USING THE APPLIANCE
The air fryer can be used to cook a wide assortment of food.
1. Insert the plug in an earthed wall socket.
2. Using the handle carefully pull the frying tray out of the air fryer.
3. Place the food ingredients into the basket.
Note: Never fill the basket beyond the Max amount indicated on
page 10, as this could affect the quality of the end-result.
4. Slide the frying tray back into the air fryer.
Never use the frying tray without the basket inplace.
5. Turn the Temperature knob to the required temperature. (See
page 10 to determine the right temperature).
6. To switch ON the appliance, turn the Timer knob to the required
preparation time.
Note: Add 3 minutes to the preparation time when the appliance is
cold. You can also let the appliance preheat without any ingredients
inside. In that case, turn the timer knob to a little more than 3
minutes and wait until the heating-up light goes out (after approx. 3
minutes). Then fill the tray and turn the timer knob to the required
preparation time.
The Power on light and the heating-up light will come on.
During the operation of the air fryer, the heating indicator lamp
will turn on and off continuously. This shows that the heating
components are turning on and off continuously, thus to maintain
the Setting temperature.
The redundant oil from the food ingredients will be collected at the
bottom of the basket under the grill.
To Next Page
Loading...
