Haden HWDI1480 - User Manual

Need help?

Do you have a question about the Haden HWDI1480 and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features

This document describes the Haden 8KG Integrated Washer Dryer, model HWDI1480, a combined washing machine and dryer designed for domestic use.

Function Description

The Haden HWDI1480 is an integrated washer dryer that performs both washing and drying functions for laundry. It offers a variety of washing programs suitable for different fabric types and soil levels, as well as drying options. The machine is equipped with a control panel that allows users to select programs, adjust settings like temperature and spin speed, and set delays for operation. It also features a display to show estimated time remaining, options, and status messages.

Important Technical Specifications

Model: HWDI1480
Rated Voltage: 220 - 240V ~
Rated Frequency: 50Hz
Rated Power: 1900W
Drying Power: 1300W
Spin Speed: 1400 rpm
Dimensions (WDH mm): 595 x 540 x 825
Weight: 64kg
Washing Capacity: 8kg
Drying Capacity: 6kg
Rated Current: 10 A
Operating Water Pressure: 0.05 MPa - 1 MPa
Energy Efficiency Class (Washing): A
Energy Consumption per cycle (to wash and dry a full capacity wash load at 60°C): 5.44 kWh/Cycle
Water Consumption per cycle (Total): 136L/Cycle
Annual Energy Consumption (Using the dryer): 1088 kWh/annual
Annual Water Consumption (Using the dryer): 27200L/annual
Annual Energy Consumption (Never Using the dryer): 150 kWh/annual
Annual Water Consumption (Never Using the dryer): 12800L/annual
Washing Performance Class: A
Spin-drying efficiency class: B
Standard Washing Cycle: Intensive 60°C / 1400RPM
Noise Level of Washing: 56dB (A)
Noise Level of Spinning: 78dB (A)
Noise Level of Drying: 62dB (A)

The appliance is a Class I Electrical Product and requires an Earth connection.

Usage Features

Control Panel: The control panel includes an On/Off button, Start/Pause button, Option button for additional settings, and a display. A program selector dial allows choosing from various programs such as My Cycle, Quick, Sports Wear, 20°C, Jeans, Wool, Eco 40-60, Intensive, Spin Only, Rinse & Spin, Baby Care, Dry Only, Wash and Dry, Mix, Cotton, and 1Hour W/D.

Programs and Options:

My Cycle: Customizable program to select preferred settings.
Quick: For lightly soiled garments and under 2kg laundry that needs quick washing (cold wash).
Sports Wear: Washing activewear.
20°C: 20°C default wash.
Jeans: Wash specially designed for jeans.
Wool: Machine-washable wool or richwool textiles.
Eco 40-60: Washing brightly coloured clothes, can protect colours better. Default 40°C, not selectable, suitable for laundry washing at about 40°C-60°C.
Intensive: To increase the washing effects, washing time is increased.
Spin Only: Extra Spin.
Rinse & Spin: Extra rinse with spin.
Baby Care: This high temperature wash with extra rinse cycles ensures that no powdered detergent remains on the clothes that could harm your baby's skin.
Dry Only: Select it to dry clothes, the temperature is different. The drying time according to the load.
Wash and Dry: The standard energy programme.
Mix: Mixed load consisting of textiles made of cotton and synthetics.
Cotton: Hard-wearing textiles, heat-resistant textiles made of cotton or linen.
1Hour W/D: For small synthetic clothes or shirts, load limitation is 1 kg (about 4 shirts). Time duration is only 1 hour including wash and dry.

Delay Function: Allows setting a delay for the program to start (0-24 H).

Temperature (Temp): Button to regulate temperature between Cold, 20°C, 30°C, 40°C, 60°C, 90°C.

Speed: Button to change spin speed for the wash cycle, ranging from 0 - 400 - 600 - 800 - 1000 - 1200 - 1400 rpm.

Acoustic Signal On/Off: Mutes or activates the buzzer function.

Child Lock: Prevents children from accidentally changing a wash program. Activated by pressing and holding the Temp and Speed buttons simultaneously for 3 seconds.

Dry Level: Button to choose the dry level: Extra Dry/Normal Dry/ Gentle Dry.

Extra Dry: Need to wear clothes immediately after drying cycle.
Normal Dry: The normal dry procedure.
Gentle Dry: With this setting, laundry is left slightly damp to make light work of ironing your garments, ideal for shirts.

Preparing Laundry:

Follow care labels on clothing.
Separate laundry by type, temperature, and degree of dirtiness.
Never wash coloured and white laundry together.
Ensure no metallic materials or foreign objects are in pockets.
Close zips, fasten hooks and eyes, remove metallic or plastic hooks/curtains, and reverse textiles.
Wash socks, handkerchiefs, and small items in a washing net.
Check colourfastness before washing.
Put small clothes into pillowcases.
Turn easy-pilling and long pile fabrics inside out.
Separate clothes with different textures.
It is recommended that brassieres are washed inside a pillowcase with their zips or buttons sealed to ensure that their internal steel wires do not damage the washing-machine drum.
Heavy single items such as towels, jeans, and bulky jackets may cause an imbalance.
Ensure babies' skin is protected by washing baby articles (clothes, towels, other fabrics) separately and rinsing thoroughly.

Adding Detergent and Softener: The machine has a detergent dispenser with compartments for prewash detergent, main wash detergent, and softener.

Add detergent into the appropriate dispenser.
Apply softener before the wash cycle starts.
Apply detergent and softener according to washing amount, soiling level, water hardness, and manufacturer instructions.
For slightly dirty clothes, use a small amount of detergent in compartment II.
For excessively dirty clothes, use 1/4 of the detergent in compartment I and the remaining amount in compartment II.
Do not use the washing machine when the detergent drawer is removed.
If you forget to add detergent, you can drain the washing machine by running a drain only program.
To prevent powder detergent from staying in the drawer, dry the inside of the drawer with a cloth.
If the rinse cycle isn't removing all the detergent, use less detergent.
Softener should not exceed the MAX level in the compartment.
Wash out unused softener with a splash of water or a damp cloth after the program has finished.
Liquid detergents can be used in all programs.
Dilute viscous fabric softener and fabric conditioner with water to prevent blockage of the overflow. Maximum level is 40ml.

Maintenance Features

Cleaning the Exterior of the Washing Machine:

Never clean the appliance body or plastic parts using solvents or harsh, abrasive detergents (e.g., washing powders or creams).
Use mild liquid detergents and soft cloths only. Do not use sponges.
Proper maintenance can extend the working life.
The surface can be cleaned with diluted non-abrasive neutral detergents when necessary.
If there is any water overflow, use a wet cloth to wipe it off immediately. No sharp items should be used.
Cleaning the exterior with Formic acid and its diluted solvents or equivalent is not advised, such as alcohol, solvents or chemical products, etc.

Cleaning the Drum:

Any rusts left inside the drum by metal articles should be removed immediately with chlorine-free detergents.
Never use steel wool.
Do not put laundry in the washing machine during the drum cleaning cycle.

Cleaning the Door Seal and Glass:

Wipe the glass and seal after each wash to remove lint and stains.
If lint builds up, it can cause leaks.
Remove any coins, buttons, and other objects from the seal after each wash.

Clean the Detergent Drawer:

Press down the arrow location on the softener cover inside the dispenser drawer.
Lift the clip up and take out the softener cover and wash all grooves in the drawer with water.
Clean the inside of the recess with an old toothbrush or bottle cleaner.
Restore the softener cover and push the drawer into position.

Clean the Drain Pump Filter:

Be careful not to burn yourself while cleaning the drain filter. Water draining from the filter compartment may be hot after a high temperature wash.
Before cleaning the drain filter, switch off and unplug the washing machine.
After the power is disconnected, pull out the Dam-Board.
Turn the filter down as shown in the figure and take out sundries matters.
Reinstall each part back after sundries matters are removed.

Troubleshooting and Error Codes: The manual provides a table for troubleshooting common problems and their possible causes and solutions, such as:

Washer Dryer does not start.
Door cannot be opened.
Water leakage.
Water overflow from bottom of machine.
No light in indicator or display.
Detergent residue in drawer.
Washing effectiveness reduced.
Abnormal noise, high levels of vibration.

It also lists error codes and their solutions:

E10: No water or low water during washing cycle (Check if water pressure is too low, straighten water pipe, check if inlet valve filter is blocked).
E12: Water overflow (Restart the washer).
E21: Overtime water draining (Check if the drain hose is blocked).
E30: Door is not closed properly (Restart after the door is closed, Check if the clothes are stuck).
Others: Call up service line if issue continues.

Guarantee: The Haden product is covered by a guarantee for 24 months from the date of the original purchase. This covers faulty materials or workmanship. Proof of purchase and serial number are required for registration. The guarantee excludes transit/delivery damage, incorrect installation, improper use, accidental damage, normal wear and tear, and products with unreadable or removed serial numbers.

Waste Electrical Recycling: This symbol indicates the product is classed as Electrical or Electronic Equipment and should not be disposed of with other household waste. The WEEE Directive has been introduced across the EU to recycle waste electrical products, minimise impact on the environment, treat hazardous substances, and avoid increasing landfill. WEEE products should be disposed of by handing it over at a designated collection point.