What to do if Haden HWI1480 Washer door cannot be opened?
- EericasantiagoAug 18, 2025
If the door of your Haden washer cannot be opened, disconnect the power and restart the product. This is due to the machine’s safety protection design.
What to do if Haden HWI1480 Washer door cannot be opened?
If the door of your Haden washer cannot be opened, disconnect the power and restart the product. This is due to the machine’s safety protection design.
Why Haden HWI1480 Washer does not start?
If your Haden washer doesn't start, try the following: Ensure the door is tightly closed, the mains plug is fully inserted, the tap is turned on, and the water inlet pipe isn't twisted. Also, verify that you've pressed both the ‘Start/Pause’ and ‘On/Off’ buttons.
What to do if Haden HWI1480 Washer has abnormal noise and high levels of vibration?
If your Haden washing machine is making abnormal noises or vibrating excessively, make sure that the transport bolts have been removed and that the cabinet is installed on a solid, level floor. Check the drum for any metal articles like hairpins. Also, ensure that the legs of the washing machine are level.
What to do if Haden HWI1480 Washer has water leakage?
If you notice water leaking from your Haden washer, check that all pipe connections are tight, including the inlet and outlet pipes. Make sure that the drain pipe is not blocked. Check and fasten the water pipes and clean up the outlet hose.
What to do if Haden HWI1480 displays error E30?
If your Haden washer is showing error code E30, restart the machine after ensuring the door is properly closed and check if any clothes are stuck preventing the door from closing correctly.
What to do if Haden HWI1480 Washer displays error E10?
If your Haden washer displays error code E10, check if the water pressure is too low. Also, straighten the water pipe and check if the inlet valve filter is blocked.
What to do if Haden Washer has water overflow from bottom of machine?
If your Haden washer is overflowing from the bottom, re-fasten the inlet pipe to ensure it is firmly connected. If the outlet hose is leaking, replace the drain hose.
What to do if Haden Washer displays error E21?
If your Haden washer displays error E21, it indicates overtime water draining. Check if the drain hose is blocked.
Why Haden Washer washing effectiveness reduced?
If your Haden washer's washing effectiveness has reduced, select an appropriate procedure if the clothes are too dirty. If insufficient detergent was used, add an appropriate amount of detergent according to the instructions on the detergent pack.
How to fix no light in indicator or display of Haden HWI1480 Washer?
If there is no light in the indicator or display of your Haden washer, verify the power socket is working. Also, check that the mains plug is fully inserted, as there might be a problem with the power connector board.
Steps for unpacking, disposing of packaging materials, and removing transit bolts before installation.
Guidance on selecting a location, adjusting legs, and connecting water and electrical supplies.
Illustration of the washing machine's main parts and a list of included accessories.
Explanation of the washing machine's control panel buttons, display, and indicator lights.
Instructions on sorting laundry, checking care labels, and preparing items like zippers and pockets.
Guidance on adding detergent and softener to the correct compartments in the dispenser drawer.
Steps for running the machine before first use and performing a standard wash cycle.
Explanation of wash options like Delay, My Cycle, Temp, Speed, Acoustic Signal, and Child Lock.
Overview of available wash programmes suitable for different laundry types.
A detailed table listing programmes, load capacity, temperature, time, and spin speed.
Instructions for cleaning the exterior, drum, and door seal of the washing machine.
Step-by-step guide on cleaning the detergent drawer and the drain pump filter.
A guide to common washing machine problems, their possible causes, and recommended solutions.
A list of error codes, their specific reasons, and the corresponding solutions for the appliance.
Key technical details including model, voltage, power, dimensions, weight, and capacity.
Statement confirming compliance with EU directives and listing the manufacturer's address.
Comprehensive data on energy consumption, water usage, spin efficiency, noise levels, and programme durations.
Information on warranty coverage, what is excluded, and how to request service.