To Next Page
G
gary90Aug 10, 2025
How to fix a Häfele PBZ2VI502FTB2Pw that does not work?
- TTamara MartinezAug 10, 2025
If your Häfele Hob isn't working, the cause might be no power. Check the fuse and replace it if it's blown.
How to fix a Häfele PBZ2VI502FTB2Pw that does not work?
If your Häfele Hob isn't working, the cause might be no power. Check the fuse and replace it if it's blown.
What to do if the sensor fields on my Häfele PBZ2VI502FTB2Pw Hob do not respond?
If the sensor fields on your Häfele Hob aren't responding, there could be several reasons. First, ensure the appliance is turned on. Second, make sure you're touching the sensor field long enough (more than one second). Finally, only touch one sensor at a time, except when switching off a cooking zone.
Why does my Häfele PBZ2VI502FTB2Pw keep switching itself off?
Your Häfele Hob might be switching off due to a couple of reasons. One possibility is that no sensor field has been touched for 10 seconds after the appliance was activated. To solve this, switch on the appliance and set the heat setting without delay. Another reason could be that the sensor fields are covered or dirty, so try uncovering or cleaning them.
Why does my Häfele Hob emit an extended beep and not respond?
If your Häfele Hob is emitting an extended beep and not responding, it could be due to improper use, such as touching the wrong sensor fields or not touching them long enough. In this case, reconnect the hob. Another potential cause is that the sensor fields are covered or dirty. Ensure that you uncover or clean the sensor fields.
Why does a single cooking zone on my Häfele PBZ2VI502FTB2Pw switch off, and the residual heat indicator 'H' is shown?
If a single cooking zone on your Häfele Hob switches off and the residual heat indicator 'H' is displayed, it could be due to the timer. Try turning the cooking zone on again. Another possible reason is that the sensor fields are covered or dirty. Make sure to uncover or clean the sensor fields.
What to do if the residual heat indicator on my Häfele PBZ2VI502FTB2Pw is off when the cooking zones are still hot?
If the residual heat indicator is off even though the cooking zones are hot, it may be due to a power outage or the appliance being disconnected. The residual heat indicator will be shown again the next time the appliance is turned on and off again.
General| Model | PBZ2VI502FTB2Pw |
|---|---|
| Number of cooking zones | 2 |
| Total power | 3.7 kW |
| Material | Glass ceramic |
| Control type | Touch control |
| Category | Hob |
| Type | Induction |
| Power supply | 220-240 V |
| Safety features | Child lock, automatic switch-off |
