Haga M1 - User Manual

To Next Page

Active Noise Canceling Bluetooth Headphone

User’s Manual

Welcome to use M1 ANC (Active Noise Canceling) Bluetooth headphone. M1 utilizes the

latest ANC technology, gives you a quiet world with much less noise can better music.

Before use this headphone, please make sure below Part I and Part II are read:

Part I Wearing the Headphone Comfortably

It’s most comfortable to wear the headphone slantwise by putting the headband on fore-side of

your head as showed below. You can also try to find the best wearing for yourself.

Part II Important Tips for Using This Headphone

. Before use it, please make sure the headphone is fully charged (refer to Step I).

2. If you want to use the headphone by Bluetooth, please make sure the headphone is

successfully connected (refer to Step II).

3. If you want to use Noise Cancellation, please make sure ANC is switched on (refer to Step III).

4. This headphone is enabled battery-protection: even if it’s power off, you can use it by AUX

cable.

Need help?

Do you have a question about the Haga M1 and is the answer not in the manual?

Summary

Connect the headphone via USB cable; LED red indicates charging, blue indicates fully charged.

Press MFB for 5s to pair; connect via phone's Bluetooth settings.

Press the ANC button once; LED light turns green when ANC is enabled.

Use MFB to play/pause, Volume+/- for volume, and hold Volume+/- for track change.

Press MFB once to answer/end calls; press for 2s to reject calls.

Details noise cancelling, Bluetooth chipset, wireless range, drivers, play time, battery, charge time.

Lists items included: headphone, USB charging cable, AUX cable, and user's manual.

General