203
Before installing the handset base, make sure the radio range between the handset and the
controller(s) is good.
1. Stand in the place you wish to install
the handset unit and quickly press
the key.
2. If you have several access points:
select the access point from where you
would like to listen in to background
sounds using the keys
then .
3. You can hear what is happening around
the outdoor caller unit at the selected
access point. Reception is good if at least
3 bars are displayed.
If this is not the case, move the handset.
4. Press on the key and test the radio
range again for each access point.
Radio range bar graph
GB
6. Testing the radio range
IMPORTANT: if the handset units or controllers are too close to each other when you are testing the radio
link, this may generate interference (Larsen effects, crackling, etc.). Move the various devices over 3 metres
away from each other.
To Next Page
Loading...
