Hägglunds Fusion - This Documentation; Validity of the Documentation; Required and Additional Documentations; Presentation of Information

RE 15345-WA, Version 11.2022, Bosch Rexroth AB
This documentation | Drive system Hägglunds Fusion 5/72
1 This documentation
1.1 Validity of the documentation
This documentation applies to the Drive System, Hägglunds Fusion, European and
American version, and is intended for machine/system manufactures, tters and
service engineers.
Hägglunds Fusion is a exible product with a wide option range, this installation
and maintenance manual is intended to cover all these options. Some options
might not be included in the delivered drive system, see order specic
documentation for the exact content.
This documentation contains important information required to transport,
install, commission, operate, use, service and dismantle the product safely and
professionaly.
f Read this documentation completely before using the Hägglunds Fusion
1.2 Required and additional documentations
f Before commissioning the product, make sure to have received and fully
understood the documentations identied by the book symbol
and observe
the instructions included in these documentations.
Table 1: Necessary and supplementary documentation.
Title Document no Document type
Order conrmation Order specic Order conrmation
Order documentation Order specic E.g. hydraulic and electric diagrams,
bill of material, specications
Hägglunds CA* RE 15305-WA Installation & maintenance manual
Hägglunds CB* RE 15302-WA Installation & maintenance manual
Hägglunds BICA brake** EN 643 Installation & maintenance manual
Hägglunds Spider 2** RE 15330-WA User manual
HJägglunds Fusion RE 15345 Data sheet
Hägglunds Torque arms RE 15355 Data sheet
Hägglunds SPDC RE 15350 Data sheet
Hydraulic uid quick reference
Hägglunds products
RE 15414 Data sheet
Axial piston variable pump
A4VG series 32 Europe
92003-01-B Instruction manual
*Depending on the hydraulic motor type in the drive system
** Required if included in scope
1.3 Presentation of information
Consistent safety instructions, symbols, terms and abbreviations are used in the
present documentation to facilitate orientation for the reader and to ensure safe
product handling. The explanations in the following sections will provide for easy
understanding.