Hägglunds Fusion - Improper Use; Personnel Qualifications

8/72 Hägglunds Fusion Drive system | Safety instructions
Bosch Rexroth AB, RE 15345-WA Version 11.2022,
2.3 Improper use
Any use other than that described as intended use shall be considered as improper
and is therefore impermissible.
Bosch Rexroth shall accept no liability whatsoever for damage resulting from
improper use. The user shall bear all risks arising from improper use.
Similarly, the following foreseeable faulty usages are also considered to be
improper:
• Using outside the operating parameters approved in the product specic data
sheet or in the order specic documention.
• Use of uids outside of the standards as specied in RE15414 Hydraulic uid
quick reference.
• Modication of factory settings by non-authorized persons
• Use of add/on parts (e.g. mountable lter, control unit, valves) that are not
specied by Bosch Rexroth has to be approved by contact at Bosch Rexroth.
• Extension or conversion is not permissible and has to be approved by contact at
Bosch Rexroth.
• Using the drive system in explosive environments unless the component or
machine/system has been certied as compliant with the local regulations.
• Using the drive system in an aggressive atmosphere without necessary additional
measures.
2.4 Personnel qualications
The activities described in this documentation require basic mechanical, electrical
and hydraulic knowledge, as well as knowledge of the associated technical terms.
For transporting and handling the product, additional knowledge is necessary
with regard to working with a lifting device and the corresponding attachment
equipment. In order to ensure safe use, these activities may therefore only be
carried out by appropriate qualied personnel or an instructed person under the
direction and supervision of qualied personnel.
Qualied personnel are those who can recognize possible hazards and institute
the appropriate safety measures due to their professional training, knowledge, and
experience, as well as their understanding of the relevant regulations pertaining
to the work to be done. Qualied personnel must observe the rules relevant to the
subject area and have the necessary hydraulic, electric and automation knowledge.
Hydraulic knowledge means, for instance:
• Reading and fully understanding hydraulic diagram,
• Fully understanding in particular the interrelationships regarding safety devices
and having knowledge on the function and assembly of hydraulic components.
Electric knowledge means, for instance:
• Reading and fully understanding of electrical diagrams
• Certication for work with electrical equipment
Automation knowledge means, for instance:
• Reading and fully understanding of logic diagrams
• Knowledge of programmable equipment (PLC, VFD etc)
Bosch Rexroth offers training support for special elds. For more information
about training, please contact your Bosch Rexroth representative.