Need help?Do you have a question about the Haglof Vertex III V1.5 and is the answer not in the manual?
General| Brand | Haglof |
|---|---|
| Model | Vertex III V1.5 |
| Category | Measuring Instruments |
| Language | English |
Explains the physical keys and their operation.
Describes the specific functions of the ON and arrow keys.
Details the red cross hair sight for accurate targeting.
Notes the built-in signal for registered measurements.
Covers battery type, placement, and status indicators.
Discusses environmental factors and calibration for accuracy.
Main menu for configuring device settings.
Setting Metric/Feet and DEG/GRAD/%.
Configuring Pivot Offset and Transponder Height.
Inputting manual distance without a transponder.
Using BAF for tree diameter calculations.
Steps for calibrating the instrument.
Adjusting display settings.
Modifying cross hair light intensity.
Step-by-step guide for height measurement using a transponder.
Guide for height measurement using manual distance.
Measuring angles and inclinations in the terrain.
How to perform distance measurements.
Calculating minimum tree diameter using BAF.
Compensating diameter calculations for terrain inclination.
How to operate the T3 transponder and understand its signals.
Guidelines for sending data via IR.
Details the data format and parity used in IR transmission.
Quick steps for height, angle, and distance measurements.
Instructions for turning the T3 transponder on and off.
To Next Page
