To Next PageTo Next Page
Need help?Do you have a question about the Haier 1U105S2SS1FA and is the answer not in the manual?
General| Refrigerant | R32 |
|---|---|
| Star Rating | 3 Star |
| Compressor Type | Rotary |
| Power Supply | 1 Phase, 50 Hz |
| Indoor Unit Weight | 9 kg |
| Type | Split |
| SEER | Not Available |
| Voltage (V) | 220-240V |
| Indoor Noise Level | 38 dB |
Informs consumers about disposal requirements for electrical and electronic products according to WEEE directive.
Explains warning symbols like DANGER, WARNING, CAUTION, NOTICE, INFORMATION used in the manual.
Defines key terms used in the manual, such as Dealer, Installer, and Service company.
Outlines the manual's procedures for handling, installing, and connecting specific unit models.
Lists general precautions to be taken before and during installation.
Details strict cautions for keeping the R32 refrigerant system clean, dry, and tight.
Refers to indoor unit manuals and provides notes for outdoor unit installation.
Provides guidelines and warnings for selecting a suitable installation site for the outdoor unit.
Provides instructions for operating the outdoor unit in low ambient temperatures and preventing wind exposure.
Details requirements for checking and preparing the installation ground and foundation for stability.
Provides diagrams and dimensions for selecting the installation location for outdoor units.
Lists tools and materials required for installation and servicing, categorized by usage.
Details the types of copper pipes, radial thickness, and flare machining dimensions for R410A.
Illustrates the piping diagram for a single split system, showing connections.
Provides a table detailing pipe diameters and connection methods for different models.
Outlines the maximum allowable piping length and vertical height difference for single split systems.
Provides guidelines for checking refrigerant leakages and removing moisture from piping.
Details procedures for performing vacuum and pressure leak tests to check for leaks.
Outlines the steps for performing vacuum drying to remove all moisture from the system.
Provides key information about the refrigerant used, including environmental impact and handling.
Lists precautions and guidelines for servicing and charging refrigerant.
Explains when complete recharging is required and how to determine the refrigerant amount.
Details how to connect power supply and inter-unit cables for single and three-phase models.
Lists specifications for standard wiring components like cables and circuit breakers.
Lists items to check before test runs, covering wiring, grounding, and refrigerant piping.
Provides precautions for test runs, including initial cooling operation and unattended operation.
Outlines safety precautions before installing or performing electrical work, including grounding.
