Haier 1U140S2SN1FB - Page 3

3
Português
Haier Industrial Park,Qianwangang Road,Eco-Tech Development Zone,Qingdao 266555,Shandong,P.R.C.
EUROPEAN REGULATIONS
CONFORMITY FOR THE MODELS
IMPORTANT INFORMATION REGA-
RDING THE REFRIGERANT USED
CE
All the products are in conformity with the following
European provision:
- Low voltage Directive
- Electomagnetic Compatibility
ROHS
The products are fullled with the requirements in
the directive 2011/65/EU of the European parliament
and of council on the Restriction of the use of Certain
Hazardous Substances in Electrical and Electronic
Equipment(EU RoHS Directive)
WEEE
In accordance with the directive 2012/19/EU of the
European parliament,herewith we inform the consumer
about the dis- posal requirements of the electrical and
electronic products.
DISPOSAL REQUIREMENTS:
Your air conditioning product is marked
with this symbol.This means that electrical
and electronic products shall not be mixed
with unsorted household waste.Do not
try to dismantle the system yourself:the
dismantling of the air conditioning system,treatment of
the refrigerant,of oil and of other part must be done by
a qualied installer in accordance with relevant local
and national legislation.Air conditioners must be treated
at a specialized treatment facility for reuse, recycling
and recovery.By ensuring this product is disposed of
correctly,you will help to prevent potential negative
cons- equences for the environment and human health.
Please contact the installer or local authority for more
information.Battery must be removed from the remote
controller and dis- posed of separately in accordance
with relevant local and national legislation.
This product contains uorinated greenhouse gases
covered by the Kyoto Protocol.Do not vent into the
atmosphere.
Refrigerant type:R32
GWP:675
GWP=global warming potential
Please ll in with indelible ink,
y
1 the factory refrigerant charge of the product
y
2 the additional refrigerant amount charged in the
eld and
y
1+2 the total refrigerant charge
on the refrigerant charge label supplied with the product.
The lled out label must be adhered in the proximity of
the product charging port(e.g.onto the inside of the2 stop
value cover).
A contains uorinated greenhouse gases covered by the
Kyoto Protocol
B factory refrigerant charge of the product:see unit name
plate
C additional refrigerant amount charged in the eld
D total refrigerant charge
E outdoor unit
F refrigerant cylinder and manifold for charging
Contains uorinated greenhouse gases
covered by the Kyoto Protocol