To Next PageTo Next PageWhy does my Haier 1U35YEFFRA-C show a suction temperature sensor failure?
A suction temperature sensor failure in your Haier Air Conditioner might be due to incorrect wiring or poor connection of the compressor.
General| Brand | Haier |
|---|---|
| Model | 1U35YEFFRA-C |
| Category | Air Conditioner |
| Language | English |
Essential precautions to be taken before and during installation.
Key safety principles to follow during the installation process.
Qualifications needed for personnel performing installation work.
Procedure for charging nitrogen to maintain pressure and detect leaks.
Process of removing air and moisture from the refrigerant circuit.
Procedures for operating and testing the unit after installation.
Safety and procedural precautions for maintenance.
Specific requirements for performing maintenance tasks.
Procedures for safely scrapping the air conditioner unit.
Procedures for recovering refrigerant from the unit.
Instructions for securely mounting the outdoor unit.
Critical warnings about severe consequences of incorrect operations.
Cautions regarding potential injuries or unit damage from incorrect operations.
Specific precautions for handling units using R32 refrigerant.
Safety measures for installation, relocation, and electrical work.
Required tools and materials for installation and servicing.
Information on suitable copper pipes and their specifications.
Procedures for testing the air tightness of the system.
Steps for vacuumizing the system to remove moisture and air.
Criteria for choosing the best location to install the unit.
Steps for correctly installing the outdoor unit.
Specifications for the size of piping to be used.
Performing the air tightness test using nitrogen.
Method for vacuumizing using a vacuum pump.
Safety guidelines for performing electrical wiring work.
Step-by-step instructions for wiring the unit.
Procedure for conducting the unit's test run.
