To Next PageTo Next PageWhy does my Haier Air Conditioner show a suction temperature sensor failure?
The suction temperature sensor failure in your Haier Air Conditioner may be caused by incorrect wiring or poor connection of the compressor. Ensure the wiring is correct and the connections are secure.
General| Model | 1U35MEEFRA-NR |
|---|---|
| Cooling Capacity (BTU) | 12000 |
| Cooling Capacity | 3.5 kW |
| Energy Efficiency Ratio (EER) | 3.21 |
| Refrigerant | R32 |
| Star Rating | 3 Star |
| Power Supply | 220-240V, 50Hz |
| Air Flow (Indoor) | 600 m3/h |
| Type | Split Air Conditioner |
Specific safety warnings regarding installation procedures and potential hazards.
Specific safety cautions regarding installation procedures and potential hazards.
Important precautions and environmental checks before and during installation.
Items to check after installation and procedures for testing the unit.
Safety guidelines for operating and handling the air conditioner unit.
Safety rules for unit installation, modification, and repair.
Specific safety precautions for units using R32 refrigerant.
Safety measures for installation, electrical work, and pre-operation testing.
Common troubleshooting steps and error diagnosis for the outdoor unit.
