To Next PageTo Next PageWhy does my Haier Air Conditioner show a suction temperature sensor failure?
A suction temperature sensor failure in your Haier Air Conditioner might be due to incorrect wiring or poor connection of the compressor.
General| Brand | Haier |
|---|---|
| Model | 1U35S2SQ1FA |
| Category | Air Conditioner |
| Language | English |
Details on fluorinated greenhouse gases, R32 type, and GWP value.
General instructions and warnings for unit installation.
Procedures, area isolation, site inspection, and fire control measures.
Checks for room area, surrounding environment, and utility placement.
Guidelines on ventilation, fire hazards, static electricity, and refrigerant leaks.
Notes on surrounding conditions, wiring, earthing, and circuit protection.
Connecting pipes, drain hose, and power lines for indoor unit installation.
Procedure for pressure maintaining and leak detection using nitrogen.
Securing the outdoor unit and connecting pipes, avoiding fire sources.
Procedures for securely fixing the outdoor unit to a support or wall.
Aligning and tightening connecting pipes for the outdoor unit.
Steps for vacuumizing the system using a digital vacuum gauge.
How to perform leak detection on connecting pipe joints.
List of items to check after installation for proper operation.
Steps for performing a test run and checking unit operation.
Warnings against welding and disassembly at user sites for certain faults.
Guidelines for site setup, zoning, ventilation, equipment, and safety signs.
Lists of exclusive, restricted, and prohibited tools and materials for R32 units.
Detailed steps for vacuumizing the system with a pump and gauge.
Detailed procedure for pressurizing with nitrogen and checking for leaks.
Step-by-step guide for vacuumizing the system using a vacuum pump.
Table correlating LED flashes with trouble descriptions and diagnoses.
