To Next PageTo Next PageWhy does my Haier 21T9D TV remote control not work?
If the remote control for your Haier TV isn't working, there might be a few reasons. First, the batteries could be dead or not installed correctly. Also, check for any obstructions between the remote and the TV's infrared receiver. Strong light interference near the receiver can also cause issues. Finally, ensure the main power to the TV is switched on.
What to do if my Haier 21T9D TV has no picture?
First, make sure the TV's power supply is correctly connected and switched on. Then, check that the TV isn't set to 'PICTURE MUTE' and that the brightness and contrast settings aren't set too low.
What to do if my Haier TV has no color?
Simply adjust the color control on your Haier TV.
Why does my Haier 21T9D TV have poor color/tint with good sound?
If your Haier TV has poor color or tint but the sound is good, the contrast, color, and tint settings might be incorrectly adjusted. Also, if you moved the TV while it was on, color shading might occur. Turn off the TV, let it cool for about 30 minutes, and then turn it back on.
Why do spots appear on my Haier TV screen?
Spots appearing on your Haier TV screen may be due to the broadcast signal being jammed by electrical sources such as cars, motorcycles, electric trains, high tension lines, neon signs, or hair dryers.
Why do lines appear on my Haier TV screen?
Lines appearing on your Haier TV screen may be caused by the broadcast signal being jammed by other TV receivers, personal computers, TV games, or interference from radio stations.
Why is my Haier 21T9D TV making a clacking noise?
A clacking noise inside your Haier TV receiver might be due to the expansion of the shell caused by temperature changes. This shouldn't affect the picture or sound quality.
Why does my Haier TV have color spots?
Color spots can be caused by a Colour Purity fault, often due to moving the TV, placing magnets nearby, or using appliances like vacuum cleaners close to the screen. To fix this, turn off the TV using the main power switch for 15 minutes. When you turn it back on, the TV will automatically degauss the picture. For severe cases, leave the TV off overnight.
How to fix double or triple image disturb on Haier TV?
This issue, known as ghosting, can be due to electrical interference from sources like cars, motorbikes, fluorescent lamps, or dirty insulators on power cables. You can minimize ghosting by using an outside aerial and high-quality cable and terminations. Adjusting the aerial direction might also help.
General| Display Technology | LED |
|---|---|
| Screen Size | 21 inches |
| Aspect Ratio | 16:9 |
| HDMI Ports | 1 |
| USB Ports | 1 |
| Sound Output | 10W |
| Resolution | 1366 x 768 |
Guide to connecting the TV's antenna for signal reception.
Instructions for installing batteries in the remote control.
Identifies buttons and ports on the front and side of the TV.
Details the input/output terminals located on the back of the TV.
Explains the purpose and operation of each button on the remote.
Steps for turning the television on and off.
Describes the automatic standby function to save energy.
How to tune into and switch between TV channels.
Automatic scanning for available TV channels.
How to display channel numbers and information on screen.
Setting energy saving modes and favorite channels.
How to set and return to a shuttle channel.
Procedure for automatically scanning and storing TV channels.
Steps for manually searching and tuning TV channels.
Fine-tuning picture and sound for optimal reception.
How to skip unwanted preset channels.
Choosing from preset picture quality settings.
Customizing and saving picture parameters in memory.
Choosing from preset sound quality settings.
Adjusting volume levels for different sound modes.
Enables fading in/out effect when changing channels.
Temporarily silencing the TV's audio output.
Configuring the TV to turn off automatically at a set time.
Setting the TV to enter standby after a duration.
Scheduling the TV to turn on at a specific time and channel.
Pre-setting channels to automatically tune at specific times.
Adjusting picture filters and activating screen protection.
Using curtain effects and displaying the calendar.
Reordering or swapping TV channels.
Setting or resetting a four-digit security password.
Configuring various lock options like tuning, AV, child, and volume.
Explains game controls and how to play the built-in games.
Guide to connecting external audio/video sources like DVD or VCR.
