Haier A3FE742CMJ - Door Reversibility Details; Technical Data; Product Fiche and Specifications

Installation
GB GB
Technical Data
13. Change the positions of the blanking plugs and
the screw on the side.
14. Take out the new hinges from the accessory bag
and screw the new lower hinge to the other side
of the door opening.
15. Lift the door carefully on to the lower hinge so
that the pivot ts into the hinge barrel.
16. Fix the upper hinge with the screws.
17. Put the connection cable through the hinge
cover (delivered in the accessory bag) and put it
over the hinge.
18. Plug in the connection cable and t it into the
opening.
19. Replace faceplate and cover, x it with the
screws and reinsert the xation (see g. 3).
14.
13.
15. 16.
17. 18.
19.
After the change of the door check that the door seals are located properly on the housing
and all screws are tightened well.
Product che according to regulation EU No. 1060/2010
Trade mark Haier
Model identier A3FE742CMJ
Category of the model
Refrigerator-freezer
Energy eciency class
A++
Annual energy consumption (kWh/year)
1)
313
Storage volume cooling (L) 307
Storage volume freezing (L) **** 129
Star rating ****
Temperature of other compartments > 14°C Non applicaber
Frostfree system
Yes
Power cut safe (h)
16
Freezing capacity (kg/24h)
12
Climate class
This appliance is intended to be used at an
ambient temperature between 10 °C and
43°C.
SN-N-ST-T
Airborne acoustical noise emissions
(db(A) re 1pW)
38
Construction type
Freestanding
1)
based on standard test results for 24 hours. Actual energy consumption will depend on
how the appliance is used and where it is located.
Additional technical data
28 29
Voltage / Frequency 220-240V ~/ 50Hz
Input current (A)
1.4
Main fuse (A)
15
Coolant R600a
Dimensions (H/W/D in mm)
1905 /700/676