Need help?Do you have a question about the Haier AB12CS1ERA and is the answer not in the manual?
General| Type | Split |
|---|---|
| Cooling Capacity | 3.5 kW |
| Operating Voltage | 220-240 V |
| Operating Frequency | 50 Hz |
| Refrigerant | R410A |
| Cooling Capacity (BTU) | 12000 BTU |
Confirms compliance with European directives for safety, hazardous substances, and waste.
R410A refrigerant details, Kyoto Protocol, and safe venting practices.
Guidance on the responsible disposal of old units and packaging materials.
Essential safety advice for operation, maintenance, and installation to prevent injury.
Key technical specifications including operating temperatures and electrical requirements.
Explanation of warning symbols and critical warnings for safe operation.
Cautions related to cooling airflow, refrigerant handling, and unit usage.
Cautions on operating with damp hands, using correct fuses, and cleaning.
Guidelines for proper installation location, wiring, and earthing.
Detailed explanation of the remote controller's buttons and display functions.
Instructions on how to install batteries into the remote controller.
Step-by-step guide for basic unit operation like starting and mode selection.
Explanation of the sleep mode function and its temperature adjustments.
Details on FAN mode limitations and setting timer functions for automatic start/stop.
How to use POWER for rapid operation and QUIET for silent operation, plus airflow adjustment.
Identifying normal operational sounds and visual phenomena that are not malfunctions.
Checks to perform when the unit does not start, covering power and breaker issues.
Common causes for insufficient cooling or heating and checks to perform.
List of failure codes indicated by LEDs and their possible reasons.
Tips for optimal use, including airflow adjustment and timer usage.
Guidance on post-season care, pre-season checks, and cleaning the unit.
General precautions for cleaning the unit, like turning off power and avoiding wet hands.
Detailed steps for cleaning the air inlet grille and air filter.
Important warnings, caution meanings, and criteria for choosing the installation location.
Instructions for installation personnel regarding customer operation guidance.
Steps to take before installation and criteria for choosing the installation location.
Recommended ceiling heights and steps for preparing the unit and ceiling opening.
Instructions and precautions for connecting refrigerant piping, including torque specs.
Guidelines for installing the water drainage pipe correctly, including slope and insulation.
Specific cautions related to the installation of the drain water lifting pipe.
Step-by-step instructions for installing the indoor unit in new or existing ceilings.
Instructions for wiring and checks to perform after wiring, including water drainage confirmation.
General instructions and precautions for wiring the unit, including wire types and circuit breakers.
Examples of correct wiring connections and warnings about incorrect wiring.
Crucial checks to perform after installation completion, including gas leakage and wiring.
To Next Page
