414
Super Match
Buttons of the wire controller
Mode switch
Choose running mode
Fan speed switch
Change wind speed
Swing switch
Open and close air ap
TEMP switch
Used for changing set temperature
Time switch
It is used to regulate setting time.
Air change switch
It is used to open and close air
change function. The mode is as
follows:
No display-air change (automatic)-
air change (RECOVERY)-air
change (NORMAL)
ON/OFF switch
Do on and off function. The unit is
on when pressing it; and is off
when pressing it again.
Reset key
When in abnormal state, push the
reset key with a spike, which may
return the unit to normal
Clock, timing and address setting
Health switch
Used to control oxygen
function and negative ion
Timing switch
It is used for choosing
timing running
Self-inspection
switch
It is used for inspection
service
Filter reset
After cleaning air inlet
and lter, press
this switch. The unit
begins to run
To Next Page
Loading...
