Indoor Unit
89
Super Match
3. Installing brackets
Install the brackets with nuts, washers and spring
washers. (Fig.14)
Reset the hex bolts as shown in Fig.15.
Apply the indoor unit to the brackets. (Fig.16) Now,
securely tighten the hex bolts in both sides.
5. Installing the drain hose
Select whether the drain hose will be connected to the left or right side.(Fig.2)
Insert the drain hose into the drain pan, then secure the drain hose with a nylon fastener.(Fig.5) Wrap the
insulation (drain hose) around the drain hose connection. (Fig.6)
Be sure to arrange the drain hose correctly so that it is leveled lower than the drain hose connecting port of the
indoor unit. (Fig.17)
When drain hose is arranged backward. Secure the drain hose with the VT wire. (Fig.18)
To Next Page
Loading...
