Indoor Unit
Operating Control Panel 1
(1) Operation Control Panel
(2) Cover Plate
(3) Front Panel
(4) Inlet Grill(Filter inside)
(5) Human Sensor
(6) RUNNING Indicator Lamp
(7) TIMER Indicator Lamp
(8) POWER Indicator Lamp
(9) Emergency Switch
(10) Remote Receiver
Operating Control Panel 1
Operating Control Panel 2
(1) Operation Control Panel
(2) Cover Plate
(3) Front Panel
(4) Inlet Grill(Filter inside)
(5) Human Sensor
(6) WIFI Indicator Lamp
(7) Display Indicator Lamp
(8) Emergency Switch
(9) Remote Receiver
Operating Control Panel 2
Parts and Functions
Note:
For the wired control type unit, the unit state should be checked by the wired controller, instead of the
remote receiver.
And if you set the TIMER function, the TIMER LED on the remote receiver will not be on.
7
To Next Page
Loading...
