To Next PageTo Next Page
Need help?Do you have a question about the Haier AD092MLERA and is the answer not in the manual?
General| Brand | Haier |
|---|---|
| Model | AD092MLERA |
| Category | Air Conditioner |
| Language | English |
Details European directives conformity and disposal requirements in Italian.
Details European regulations conformity and disposal requirements in English.
Details European directives conformity and disposal requirements in French.
Details European directives conformity and disposal requirements in German.
Details European regulations conformity and disposal requirements in Spanish.
Important information regarding the refrigerant used, in Italian.
Important information regarding the refrigerant used, in English.
Important information regarding the refrigerant used, in French.
Important information regarding the refrigerant used, in German.
Important information regarding the refrigerant used, in Spanish.
Identifies key components like evaporator, air outlet frame, and water pan for specific models.
Details the function of each button on the wire controller for operation.
Explains self-inspection, filter reset, and reset key functions of the controller.
Explains various indicators on the wire controller display for unit status.
Details the functions of individual buttons on the remote controller.
Instructions for signal transmission, range, and handling of the remote controller.
Step-by-step guide for setting the clock on the remote controller.
Guidance on loading, replacing, and removing batteries from the remote controller.
Critical warnings regarding installation, repair, electrical hazards, and structural integrity.
Attention points for safe operation, including grounding, electrical safety, and humidity.
Covers various operational safety aspects like heating, aeration, flammables, and defrosting.
Safety guidelines for appliance usage by individuals and children, plus fan rotation.
Step-by-step guide to start and stop the air conditioner using the wired controller.
Instructions for choosing modes, setting temperature, and adjusting fan speed.
Procedure for setting the real-time clock on the wired controller.
Explanation of the power failure compensation function and its settings.
Guide to setting scheduled ON and OFF times for the air conditioner.
Clarifies timing function meanings and provides important notes for its use.
Procedure to check past malfunction records of indoor units.
Details on how to change function switches for unit configuration.
Comparison of functions between main and auxiliary wired controllers.
Guide to starting, setting, and stopping the unit in AUTO, COOL, HEAT, and DRY modes.
Specific operational notes and behaviors for FAN, DRY, and HEAT modes.
Instructions for operating the unit exclusively in Fan mode.
Key points and limitations specific to the Fan operation mode.
Guide to using the SWING button to adjust airflow direction.
Safety warnings and tips for adjusting airflow direction in different modes.
Instructions for setting and confirming ON/OFF timer operations.
Notes on timer function memory and the need for reset after power loss.
Guidelines for cleaning the air outlet port, unit shell, and wind deflector.
Instructions for cleaning the air cleaner filter effectively.
Procedures for maintenance before and after the operating season.
Identifies common symptoms and their likely causes for troubleshooting.
Lists critical fault conditions requiring immediate operation stop and service.
Guidelines for selecting an appropriate and safe location for the indoor unit.
Details the installation steps and provides dimensions for hoisting studs.
Illustrations and specifications for different indoor unit models.
Important cautions for installation and selection of fan rotated speed.
Guidance on concealed units, air return plenums, and pipe configurations.
Instructions for drainpipe setup and heat preservation for blast pipes.
Steps for removing the controller from its holder and installing the holder.
Instructions for wiring the controller, including using shielded wire and grounding.
Detailed requirements for water drainage piping, heat insulation, and gradient.
Information on piping materials, heat insulation, and hose installation.
Details tubing specifications, permissible lengths, and refrigerant filling amounts.
Steps for cutting, vacuumizing, connecting, and leak checking refrigerant tubing.
Critical warnings and attention points for safe electrical wiring and connections.
Details wiring specifications, material requirements, and supply wiring diagrams.
Illustrates signal wiring and connection methods for outdoor units.
Describes three ways to connect line control to multiple indoor units.
Details unit control modes and specifies wiring dimensions and ratings.
Provides signal wiring lengths and dimensions, plus code setting information.
Instructions for setting indoor unit PCB switches for address and control.
Details settings for communication addresses between units and control options.
Explains switchover functions for room temp, controller roles, and defrosting.
Compares the functions available on main versus auxiliary wired controllers.
Details the initialization process and general operation of wired controllers.
Guides for setting central control and communication addresses for indoor units.
Procedures for checking fault history and inquiring the running status of indoor units.
Essential checks before test run and verification of installation quality.
Reference table for fault codes, their descriptions, and potential remedies.
