Haier AD092MLERA - Installation: Tubing and Refrigerant; Tubing Specifications and Refrigerant Filling; Refrigerant Tubing Connection Procedures

30
(2) Calculation method of heating capacity---Heating capacity to be known
Heating Capacity Modification = Heating capacityx (A x B x C x D x E ) W
(3) Calculation method of refrigeration capacity---Only one indoor unit running
Outdoor modified capacity with a single indoor running=outdoor modified capacity*
standby indoor normal capacity
Indoor total normal capacity
(Outdoor modified capacity heating or outdoor capacity after modify item 1 and 2)
C. Capacity modification value
under airflow variation rate of
indoor unit group
1.1
1.0
0.9
80 90 100 110 120
A. Capacity modification value
under indoor air dry-bulb
temperature condition
1.2
1.1
1.0
0.9
0.8
15 20 24
D. Capacity compensation suitable for total
capability of indoor unit group (heating)
Total capacity of indoor unit group(%)
1.2
1.0
0.8
0.2
0
20 40 60 80 100 120 140
Indoor air dry-bulb
temperature
Capacity modification coefficient
Standard capacity
airflow variation rate(%)
Capacity modification value
0.4
0.6
E. Heating compensation factor at different pipe length
pipe length of single way(m)
001 021 041 061 08102 04 06 080
0.90
0.92
0.94
0.98
0.96
for all modules
1.00
heating compensation factor
Inlet water temperature ( ℃）
B. Capacity modification value under Inlet water
temperature condition
Capacity modification coefficient