.7/ Wbpqfkd fiirpqo^qflk@
.8/ Wbpqfkd `lkafqflk@
^4 Xkfq orkkfkd fk qeb kljfk^i `lkafqflk
_4 Wbpq fk qeb pbjf3^kb`elf` `e^j_bo
`4 Qlfpb ibsbi s^ofbp colj qeb ^`qr^i c^`qlop pr`e ^p ollj pqor`qrob2 bq`4
.9/
7j
Test method
1. Set the unit: 1) the unit is placed on the rubber whose thickness is 5mm; 2) if the
height between the air outlet and ground is less than 1m, block the unit up to 1m.far
from ground
2. Test position: After setting the unit ,the test position for the noise is 1m far from the
front panel
>_]]VbTZR\ <Zb >_^UZdZ_^Vb
-122-
To Next Page
Loading...
