To Next PageTo Next PageWhy my Haier AP075M Air Conditioner doesn't work?
Your Haier Air Conditioner might not be working due to several reasons: * There could be a power failure; in this case, wait for the power to return. * The plug might not be properly connected; ensure the plug is securely connected. * The main switch might not be pressed; try pressing the main switch to turn it on.
What to do if my Haier Air Conditioner works but does not cool the room?
If your Haier Air Conditioner is running but not cooling the room, consider the following: * Check if any windows are open and close them. * Identify and remove any heat sources in the room, such as burners or lamps. * Ensure the air filter is clean, as a clogged filter can reduce cooling efficiency. Clean the filter if necessary. * Avoid operating the appliance at too low a temperature (below 22).
Why does my Haier AP075M Air Conditioner work for a short period only?
Your Haier Air Conditioner might be working for only a short period if: * The set temperature is too close to the room's temperature; try decreasing the setting temperature. * Something is blocking the suction vent on the back of the condenser; remove any obstacles.
General| Brand | Haier |
|---|---|
| Model | AP075M |
| Category | Air Conditioner |
| Language | English |
Important safety instructions for handling and repairing the air conditioner unit to avoid electric shock and other hazards.
A flowchart detailing steps for diagnosing and repairing common operational issues with the air conditioner.
Identifies key external parts of the portable air conditioner, including panels, grilles, and wheels.
Details the operation of the time switch, rotary switch, and thermostat switch on the control panel.
Lists common issues like unit not starting, not cooling, or excessive noise, with possible causes and remedies.
Provides detailed technical specifications including dimensions, capacity, voltage, power consumption, and component models.
Illustrates the flow of refrigerant through the compressor, heat exchangers, and evaporator.
Depicts the electrical connections for components like the motor, compressor, and control switches.
